Hyundai TUCSON dimensions that matter for a garage
The mirror-to-mirror width is the first measurement to scrutinise: this is a relatively wide vehicle at the garage entrance. Its length is typical of a medium-to-large family car or SUV, so rear shelving and garage-door mechanisms can materially reduce usable depth. Height deserves a separate check if the garage has an up-and-over door, low lintel, roof bars or a roof box.
The reference width with mirrors extended is 2,130 mm. For the entrance check, use the narrowest clear width of the garage door at mirror height, not the nominal door size.
Illustrative garage-door clearance
These examples compare the reference vehicle width with three clear opening widths. They are examples only — use the width you physically measure at your own door.
| Clear door opening | Mirrors extended | Mirrors folded |
|---|---|---|
| 2,134 mm | 4 mm | Confirm folded width |
| 2,286 mm | 156 mm | Confirm folded width |
| 2,438 mm | 308 mm | Confirm folded width |
Clearance shown is total width, not clearance on each side. A positive number does not mean the opening will be comfortable to use.
What could stop it fitting even when the numbers look positive?
A garage rarely behaves like a perfect rectangular box. Door tracks, frame trim, masonry that narrows at one height, an up-and-over mechanism, pipework, shelving and stored equipment can all reduce the usable space. The car also needs to be positioned accurately as it enters. For daily use, the ability to open the driver's door may matter more than the final few centimetres of theoretical side clearance.
Measure the clear door width at mirror height, the lowest entrance obstruction, the usable internal width after shelving and pillars, and the usable depth with the door closed. Then use the full calculator rather than relying on a generic garage size.
Run the full Hyundai TUCSON garage check
The calculator will preload this vehicle's reference dimensions. You only need to add your garage measurements and correct any specification that differs from your exact car.
Reference-data note
This page uses a Hyundai UK reference for the 2021+ reference vehicle. Current facelift length can vary slightly; verify exact model-year dimensions. Where a dimension is not sufficiently supported by the source used here, the site deliberately asks you to enter it manually rather than guessing.
Check the manufacturer/source reference →
Similar vehicles to check
Hyundai TUCSON garage-fit FAQs
Will a Hyundai TUCSON fit through a 7 ft garage door?
Using the 2,130 mm reference mirror width on this page, a 2,134 mm clear opening is wider by about 4 mm in total. That only answers the width question; height, alignment and exact vehicle specification still need checking.
How much internal garage width does a Hyundai TUCSON need?
The reference body width is 1,865 mm, but a usable garage needs additional space for door opening, positioning and any shelving or pillars. The calculator lets you enter the internal width and obstructions separately.
How long a garage does a Hyundai TUCSON need?
The reference overall length is 4,500 mm. The garage must be longer than that, but useful clearance also depends on the closed door, shelving, pipes and whether you need access to the boot or tailgate.