Toyota Yaris Cross dimensions that matter for a garage
The official reference used here does not give a mirror-to-mirror figure, so entrance fit should not be estimated from body width alone. Overall length is less demanding than many larger SUVs, although even a shorter car still needs useful front and rear clearance.
The manufacturer reference used here does not provide a mirror-to-mirror width. For the entrance check, use the narrowest clear width of the garage door at mirror height, not the nominal door size.
Illustrative garage-door clearance
These examples compare the reference vehicle width with three clear opening widths. They are examples only — use the width you physically measure at your own door.
| Clear door opening | Mirrors extended | Mirrors folded |
|---|---|---|
| 2,134 mm | Mirror width required | Confirm folded width |
| 2,286 mm | Mirror width required | Confirm folded width |
| 2,438 mm | Mirror width required | Confirm folded width |
Clearance shown is total width, not clearance on each side. A positive number does not mean the opening will be comfortable to use.
What could stop it fitting even when the numbers look positive?
A garage rarely behaves like a perfect rectangular box. Door tracks, frame trim, masonry that narrows at one height, an up-and-over mechanism, pipework, shelving and stored equipment can all reduce the usable space. The car also needs to be positioned accurately as it enters. For daily use, the ability to open the driver's door may matter more than the final few centimetres of theoretical side clearance.
Measure the clear door width at mirror height, the lowest entrance obstruction, the usable internal width after shelving and pillars, and the usable depth with the door closed. Then use the full calculator rather than relying on a generic garage size.
Run the full Toyota Yaris Cross garage check
The calculator will preload this vehicle's reference dimensions. You only need to add your garage measurements and correct any specification that differs from your exact car.
Reference-data note
This page uses a Toyota UK reference for the current vehicle. Mirror-to-mirror width is not prefilled. Where a dimension is not sufficiently supported by the source used here, the site deliberately asks you to enter it manually rather than guessing.
Check the manufacturer/source reference →
Similar vehicles to check
Toyota Yaris Cross garage-fit FAQs
Will a Toyota Yaris Cross fit through a 7 ft garage door?
This page does not have a sufficiently reliable mirror-to-mirror figure to answer that safely. Measure the actual car or use an exact manufacturer specification before checking the entrance.
How much internal garage width does a Toyota Yaris Cross need?
The reference body width is 1,765 mm, but a usable garage needs additional space for door opening, positioning and any shelving or pillars. The calculator lets you enter the internal width and obstructions separately.
How long a garage does a Toyota Yaris Cross need?
The reference overall length is 4,172 mm. The garage must be longer than that, but useful clearance also depends on the closed door, shelving, pipes and whether you need access to the boot or tailgate.